first commit

2020-07-30 17:36:21 +09:30
commit de1878ad73
11 changed files with 715 additions and 0 deletions
@@ -0,0 +1,80 @@
+#Managed by asnible, do not configure manually
+#
+# Sample configurations for these daemons can be found in
+# /usr/share/doc/frr/examples/.
+#
+# ATTENTION:
+#
+# When activating a daemon for the first time, a config file, even if it is
+# empty, has to be present *and* be owned by the user and group "frr", else
+# the daemon will not be started by /etc/init.d/frr. The permissions should
+# be u=rw,g=r,o=.
+# When using "vtysh" such a config file is also needed. It should be owned by
+# group "frrvty" and set to ug=rw,o= though. Check /etc/pam.d/frr, too.
+#
+# The watchfrr and zebra daemons are always started.
+#
+bgpd=yes
+ospfd=no
+ospf6d=no
+ripd=no
+ripngd=no
+isisd=no
+pimd=no
+ldpd=no
+nhrpd=no
+eigrpd=no
+babeld=no
+sharpd=no
+pbrd=no
+bfdd=yes
+fabricd=no
+vrrpd=no
+
+#
+# If this option is set the /etc/init.d/frr script automatically loads
+# the config via "vtysh -b" when the servers are started.
+# Check /etc/pam.d/frr if you intend to use "vtysh"!
+#
+vtysh_enable=yes
+zebra_options="  -A 127.0.0.1 -s 90000000"
+bgpd_options="   -A 127.0.0.1"
+ospfd_options="  -A 127.0.0.1"
+ospf6d_options=" -A ::1"
+ripd_options="   -A 127.0.0.1"
+ripngd_options=" -A ::1"
+isisd_options="  -A 127.0.0.1"
+pimd_options="   -A 127.0.0.1"
+ldpd_options="   -A 127.0.0.1"
+nhrpd_options="  -A 127.0.0.1"
+eigrpd_options=" -A 127.0.0.1"
+babeld_options=" -A 127.0.0.1"
+sharpd_options=" -A 127.0.0.1"
+pbrd_options="   -A 127.0.0.1"
+staticd_options="-A 127.0.0.1"
+bfdd_options="   -A 127.0.0.1"
+fabricd_options="-A 127.0.0.1"
+vrrpd_options="  -A 127.0.0.1"
+
+# configuration profile
+#
+#frr_profile="traditional"
+#frr_profile="datacenter"
+
+#
+# This is the maximum number of FD's that will be available.
+# Upon startup this is read by the control files and ulimit
+# is called.  Uncomment and use a reasonable value for your
+# setup if you are expecting a large number of peers in
+# say BGP.
+#MAX_FDS=1024
+
+# The list of daemons to watch is automatically generated by the init script.
+#watchfrr_options=""
+
+# for debugging purposes, you can specify a "wrap" command to start instead
+# of starting the daemon directly, e.g. to use valgrind on ospfd:
+#   ospfd_wrap="/usr/bin/valgrind"
+# or you can use "all_wrap" for all daemons, e.g. to use perf record:
+#   all_wrap="/usr/bin/perf record --call-graph -"
+# the normal daemon command is added to this at the end.